Manufactured by CHG Bearing, the NU3320 is a precision Single Row Cylindrical Roller Bearings. Key dimensional parameters include a 100 mm bore diameter, a 215 mm outer diameter, and a 82.6 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
NU3320 - Single Row Cylindrical Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | NU3320 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Single Row Cylindrical Roller Bearing |
| Number of Rows | Single Row |
| Tolerance Class | P0 |
| Dimensions | |
| Bore Diameter (d) | 100 mm |
| Width (B) | 82.6 mm |
| Outer Diameter (D) | 215 mm |
| Bore Diameter Tolerance | -0.020 – 0 mm |
| Outside Diameter Tolerance | -0.030 – 0 mm |
| Width Tolerance | -0.20 – 0 mm |
| Enveloping Circle Diameter Fw | 129.5 mm |
| Inner Ring Chamfer | 3 min mm |
| Outer Ring Chamfer | 3 min mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 530 kN |
| Basic Static Load Rating C0 (kN) | 706 kN |
| Material | |
| Mass (kg) | 15 kg |
| Ring Material | Bearing Steel |
| Rolling Element Material | Bearing Steel |
| Cage Material | Brass |
NU3320 215 mm 100 mm 82.6 mm 129.5 mm Frequently Asked Questions about NU3320 Single Row Cylindrical Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Built for demanding industrial environments, the NU3320 Single Row Cylindrical Roller Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
To match diverse operational dynamics, CHG Bearing supplies NU3320 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
When fitting NU3320 over a 100 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
In its sealed configuration (Open Type), CHG Bearing pre-charges NU3320 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
