Manufactured by CHG Bearing, the N230 is a precision Single Row Cylindrical Roller Bearings. Key dimensional parameters include a 150 mm bore diameter, a 270 mm outer diameter, and a 45 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
N230 - Single Row Cylindrical Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | N230 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Single Row Cylindrical Roller Bearing |
| Number of Rows | Single Row |
| Tolerance Class | P0 |
| Dimensions | |
| Bore Diameter (d) | 150 mm |
| Width (B) | 45 mm |
| Outer Diameter (D) | 270 mm |
| Bore Diameter Tolerance | -0.025 – 0 mm |
| Outside Diameter Tolerance | -0.035 – 0 mm |
| Width Tolerance | -0.25 – 0 mm |
| Enveloping Circle Diameter Fw | 238 mm |
| Inner Ring Chamfer | 3 min mm |
| Outer Ring Chamfer | 3 min mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 374 kN |
| Basic Static Load Rating C0 (kN) | 492 kN |
| Material | |
| Mass (kg) | 10.3 kg |
| Ring Material | Bearing Steel |
| Rolling Element Material | Bearing Steel |
| Cage Material | Brass |
N230 270 mm 150 mm 238 mm 45 mm Frequently Asked Questions about N230 Single Row Cylindrical Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open Type), CHG Bearing pre-charges N230 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To ensure optimum performance of CHG Bearing N230 Single Row Cylindrical Roller Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 150 mm bore. For the 270 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Built for demanding industrial environments, the N230 Single Row Cylindrical Roller Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
The CHG Bearing N230 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
