Manufactured by CHG Bearing, the 522310 is a precision Four-Row Cylindrical Roller Bearings. Key dimensional parameters include a 250 mm bore diameter, a 340 mm outer diameter, and a 230 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
522310 - Four-Row Cylindrical Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 522310 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four Row Cylindrical Roller Bearing |
| Number of Rows | Four Row |
| Tolerance Class | P0 |
| Dimensions | |
| Bore Diameter (d) | 250 mm |
| Width (B) | 230 mm |
| Outer Diameter (D) | 340 mm |
| Bore Diameter Tolerance | -0.030 – 0 mm |
| Outside Diameter Tolerance | -0.040 – 0 mm |
| Width Tolerance | -0.30 – 0 mm |
| Enveloping Circle Diameter Fw | 276 mm |
| Inner Ring Chamfer | 2.1 min mm |
| Outer Ring Chamfer | 2.1 min mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 1670 kN |
| Basic Static Load Rating C0 (kN) | 4570 kN |
| Material | |
| Mass (kg) | 63.1 kg |
| Ring Material | Bearing Steel / Case-Hardened Steel |
| Rolling Element Material | Bearing Steel / Case-Hardened Steel |
| Cage Material | Brass |
| Lubrication Groove Width | 9.5 mm |
| Lubrication Holes (qty × Ø mm) | 4 × Ø5 |
522310 340 mm 250 mm 276 mm 230 mm Frequently Asked Questions about 522310 Four-Row Cylindrical Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing 522310 Four-Row Cylindrical Roller Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
When fitting 522310 over a 250 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
In its sealed configuration (Open Type), CHG Bearing pre-charges 522310 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
As a primary manufacturer, CHG Bearing supports both trial batch evaluations and container-load supply for 522310. Standard catalog sizes are stocked for rapid 3–7 day dispatch, while high-volume OEM production runs typically dispatch within 30–45 days.
