Manufactured by CHG Bearing, the 59.4*110.24 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
59.4*110.24 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 59.4*110.24 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 55' |
| Dimensions | |
| Roller Length, Lw | 110.24 mm |
| Center Recess Diameter | 30 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 2 mm |
| Large-end Diameter, Dw | 59.4 mm |
| Spherical End Radius, SR | 1763 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.005 to +0.03 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.25 |
| Axial Chamfer — Large End | 1.5 mm |
| Axial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Radial Chamfer — Large End | 1.2 mm |
| Radial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Axial Chamfer — Small End | 1.2 mm |
| Axial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Radial Chamfer — Small End | 1.5 mm |
| Radial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.32 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.4 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.004 mm |
| Roundness | 0.003 mm |
| Ovality | 0.003 mm |
59.4*110.24 59.4 mm 110.24 mm 1763 mm Frequently Asked Questions about 59.4*110.24 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Built for demanding industrial environments, the 59.4*110.24 Tapered Rollers by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
The CHG Bearing 59.4*110.24 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Quality starts with raw material selection: CHG Bearing crafts 59.4*110.24 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing 59.4*110.24 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
