Manufactured by CHG Bearing, the 30.65*38.35-1 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
30.65*38.35-1 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 30.65*38.35-1 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 2°38' |
| Dimensions | |
| Roller Length, Lw | 38.35 mm |
| Center Recess Diameter | 14 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1.5 mm |
| Large-end Diameter, Dw | 30.65 mm |
| Spherical End Radius, SR | 316 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.012 to +0.02 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.25 |
| Axial Chamfer — Large End | 1.2 mm |
| Axial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Radial Chamfer — Large End | 1 mm |
| Radial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Axial Chamfer — Small End | 1 mm |
| Axial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Radial Chamfer — Small End | 1.2 mm |
| Radial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.4 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.4 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.004 mm |
| Roundness | 0.003 mm |
| Ovality | 0.003 mm |
30.65*38.35-1 30.65 mm 38.35 mm 316 mm Frequently Asked Questions about 30.65*38.35-1 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting 30.65*38.35-1 over a mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Yes, 100% of 30.65*38.35-1 Tapered Rollers leaving CHG Bearing production lines are subjected to multi-frequency Anderometer sound testing. All units satisfy baseline Z1V1 levels, with dedicated quiet-running electric motor quality (EMQ) lots certified to Z2V2 and Z3V3 standards for silent machinery integration.
Built for demanding industrial environments, the 30.65*38.35-1 Tapered Rollers by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
The CHG Bearing 30.65*38.35-1 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
