Manufactured by CHG Bearing, the 13.8*28.06 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
13.8*28.06 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 13.8*28.06 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 55' |
| Dimensions | |
| Roller Length, Lw | 28.06 mm |
| Center Recess Diameter | 6 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 0.7 mm |
| Large-end Diameter, Dw | 13.8 mm |
| Spherical End Radius, SR | 409 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.006 to +0.006 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.125 |
| Axial Chamfer — Large End | 0.5 mm |
| Axial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Radial Chamfer — Large End | 0.5 mm |
| Radial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Axial Chamfer — Small End | 0.5 mm |
| Axial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Radial Chamfer — Small End | 0.5 mm |
| Radial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.32 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.3 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.002 mm |
| Roundness | 0.0012 mm |
| Ovality | 0.0012 mm |
13.8*28.06 13.8 mm 28.06 mm 409 mm Frequently Asked Questions about 13.8*28.06 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open Type), CHG Bearing pre-charges 13.8*28.06 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To ensure optimum performance of CHG Bearing 13.8*28.06 Tapered Rollers under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the mm bore. For the mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
The Open Type engineered for 13.8*28.06 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
The CHG Bearing 13.8*28.06 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
