Manufactured by CHG Bearing, the 46*122 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
46*122 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 46*122 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 46 mm |
| Roller Length, Lw | 122 mm |
| Center Recess Diameter | 24 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 2 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.01-0.003 mm |
| Roller Length Tolerance | -0.02 to -0.01 mm |
| Through-hole Runout | - mm |
| End-face Runout | 0.005 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.0015 mm |
| Ovality | 0.0015 mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.125 µm |
| End-face Surface Roughness, Ra (µm) | 0.2 µm |
| Chamfer Geometry | |
| Axial Chamfer | 2 mm |
| Axial Chamfer Tolerance | -0.2 to +0.2 mm |
| Radial Chamfer | 2 mm |
| Radial Chamfer Tolerance | -0.2 to +0.2 mm |
46*122 46 mm 122 mm Frequently Asked Questions about 46*122 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing 46*122 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
In its sealed configuration (Open Type), CHG Bearing pre-charges 46*122 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Every production batch of CHG Bearing 46*122 Cylindrical Rollers comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
When fitting 46*122 over a mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
