Manufactured by CHG Bearing, the 45*68 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
45*68 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 45*68 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 45 mm |
| Roller Length, Lw | 68 mm |
| Center Recess Diameter | 22 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1.5 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.005 to +0.025 mm |
| Roller Length Tolerance | -0.06 to 0 mm |
| Through-hole Runout | - mm |
| End-face Runout | 0.006 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.0013 mm |
| Ovality | 0.002 mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.16 µm |
| End-face Surface Roughness, Ra (µm) | 0.25 µm |
| Chamfer Geometry | |
| Axial Chamfer | 1.5 mm |
| Axial Chamfer Tolerance | -0.5 to +0.5 mm |
| Radial Chamfer | 1.5 mm |
| Radial Chamfer Tolerance | -0.5 to +0.5 mm |
45*68 45 mm 68 mm Frequently Asked Questions about 45*68 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing 45*68 Cylindrical Rollers comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Sourcing 45*68 directly from CHG Bearing eliminates intermediate brokerage markups while granting you factory-direct engineering backup, rigorous ISO-certified quality assurance, competitive volume wholesale pricing, and dependable supply chain stability for Cylindrical Rollers.
In its sealed configuration (Open Type), CHG Bearing pre-charges 45*68 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
The CHG Bearing 45*68 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
