Manufactured by CHG Bearing, the 28*52 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
28*52 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 28*52 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 28 mm |
| Roller Length, Lw | 52 mm |
| Center Recess Diameter | 12 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.02-0.005 mm |
| Roller Length Tolerance | -0.04 to 0 mm |
| Through-hole Runout | - mm |
| End-face Runout | 0.005 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.001 mm |
| Ovality | 0.001 mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.125 µm |
| End-face Surface Roughness, Ra (µm) | 0.25 µm |
| Chamfer Geometry | |
| Axial Chamfer | 1.2 mm |
| Axial Chamfer Tolerance | -0.2 to +0.2 mm |
| Radial Chamfer | 1.2 mm |
| Radial Chamfer Tolerance | -0.2 to +0.2 mm |
28*52 28 mm 52 mm Frequently Asked Questions about 28*52 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing 28*52 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
Every production batch of CHG Bearing 28*52 Cylindrical Rollers comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
To match diverse operational dynamics, CHG Bearing supplies 28*52 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
When fitting 28*52 over a mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
