Manufactured by CHG Bearing, the 71930 is a precision Angular Contact Ball Bearings（718 / 719 SERIES）. Key dimensional parameters include a 150 mm bore diameter, a 210 mm outer diameter, and a 28 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
71930 - Angular Contact Ball Bearings（718 / 719 SERIES）
Technical Specifications
| Overview | |
|---|---|
| Part Number | 71930 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | 719 |
| Seal Type | Open / Contact Seal Options |
| Load Direction | Radial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 150 mm |
| Width (B) | 28 mm |
| Outer Diameter (D) | 210 mm |
| Bore Diameter Tolerance | -0.025-0 mm |
| Outside Diameter Tolerance | -0.03-0 mm |
| Width Tolerance | -0.25-0 mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 90 kN |
| Basic Static Radial Load Rating C0r (kN) | 120 kN |
| Limiting Speed – Grease (r/min) | 6300 r/min |
| Limiting Speed – Oil (r/min) | 9500 (r/min) |
| Material | |
| Mass (kg) | 3 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C |
| Precision Class | P0 |
| Radial Internal Clearance | 0.018-0.053 mm |
71930 210 mm 150 mm 28 mm Frequently Asked Questions about 71930 Angular Contact Ball Bearings（718 / 719 SERIES）
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
As standard production, CHG Bearing subjects 71930 to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
Quality starts with raw material selection: CHG Bearing crafts 71930 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
To ensure optimum performance of CHG Bearing 71930 Angular Contact Ball Bearings（718 / 719 SERIES） under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 150 mm bore. For the 210 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
In its sealed configuration (Open / Contact Seal Options), CHG Bearing pre-charges 71930 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
