Manufactured by CHG Bearing, the 71920 is a precision Angular Contact Ball Bearings（718 / 719 SERIES）. Key dimensional parameters include a 100 mm bore diameter, a 140 mm outer diameter, and a 20 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
71920 - Angular Contact Ball Bearings（718 / 719 SERIES）
Technical Specifications
| Overview | |
|---|---|
| Part Number | 71920 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | 719 |
| Seal Type | Open / Contact Seal Options |
| Load Direction | Radial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 100 mm |
| Width (B) | 20 mm |
| Outer Diameter (D) | 140 mm |
| Bore Diameter Tolerance | -0.02-0 mm |
| Outside Diameter Tolerance | -0.018-0 mm |
| Width Tolerance | -0.2-0 mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 60.6 kN |
| Basic Static Radial Load Rating C0r (kN) | 65.5 kN |
| Limiting Speed – Grease (r/min) | 8500 r/min |
| Limiting Speed – Oil (r/min) | 14000 (r/min) |
| Material | |
| Mass (kg) | 0.8 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C |
| Precision Class | P0 |
| Radial Internal Clearance | 0.012-0.036 mm |
71920 140 mm 100 mm 20 mm Frequently Asked Questions about 71920 Angular Contact Ball Bearings（718 / 719 SERIES）
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To match diverse operational dynamics, CHG Bearing supplies 71920 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
The CHG Bearing 71920 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
The Open / Contact Seal Options engineered for 71920 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
To ensure optimum performance of CHG Bearing 71920 Angular Contact Ball Bearings（718 / 719 SERIES） under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 100 mm bore. For the 140 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
