Manufactured by CHG Bearing, the 71888 is a precision Angular Contact Ball Bearings（718 / 719 SERIES）. Key dimensional parameters include a 440 mm bore diameter, a 540 mm outer diameter, and a 46 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
71888 - Angular Contact Ball Bearings（718 / 719 SERIES）
Technical Specifications
| Overview | |
|---|---|
| Part Number | 71888 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | 718 |
| Seal Type | Open / Contact Seal Options |
| Load Direction | Radial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 440 mm |
| Width (B) | 46 mm |
| Outer Diameter (D) | 540 mm |
| Bore Diameter Tolerance | -0.045-0 mm |
| Outside Diameter Tolerance | -0.05-0 mm |
| Width Tolerance | -0.45-0 mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 301 kN |
| Basic Static Radial Load Rating C0r (kN) | 540 kN |
| Limiting Speed – Grease (r/min) | 750 r/min |
| Limiting Speed – Oil (r/min) | 1000 (r/min) |
| Material | |
| Mass (kg) | 21.1 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C |
| Precision Class | P0 |
| Radial Internal Clearance | 0.06-0.170 mm |
71888 540 mm 440 mm 46 mm Frequently Asked Questions about 71888 Angular Contact Ball Bearings（718 / 719 SERIES）
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting 71888 over a 440 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
As standard production, CHG Bearing subjects 71888 to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
In its sealed configuration (Open / Contact Seal Options), CHG Bearing pre-charges 71888 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Quality starts with raw material selection: CHG Bearing crafts 71888 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
