Manufactured by CHG Bearing, the 61984P4 is a precision Deep Groove Ball Bearings（618 / 619 SERIES）. Key dimensional parameters include a 420 mm bore diameter, a 560 mm outer diameter, and a 65 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
61984P4 - Deep Groove Ball Bearings（618 / 619 SERIES）
Technical Specifications
| Overview | |
|---|---|
| Part Number | 61984P4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Seal Type | Open / Contact Seal Options |
| Load Direction | Radial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 420 mm |
| Width (B) | 65 mm |
| Outer Diameter (D) | 560 mm |
| Bore Diameter Tolerance | / mm |
| Outside Diameter Tolerance | / mm |
| Width Tolerance | / mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 340 kN |
| Basic Static Radial Load Rating C0r (kN) | 570 kN |
| Limiting Speed – Grease (r/min) | 900 r/min |
| Limiting Speed – Oil (r/min) | 1100 (r/min) |
| Material | |
| Mass (kg) | 43.6 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C |
| Precision Class | P4 |
| Radial Internal Clearance | 0.06-0.170 mm |
61984P4 560 mm 420 mm 65 mm Frequently Asked Questions about 61984P4 Deep Groove Ball Bearings（618 / 619 SERIES）
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The Open / Contact Seal Options engineered for 61984P4 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
When fitting 61984P4 over a 420 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Every production batch of CHG Bearing 61984P4 Deep Groove Ball Bearings（618 / 619 SERIES） comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
To match diverse operational dynamics, CHG Bearing supplies 61984P4 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
