Manufactured by CHG Bearing, the 61930 is a precision Deep Groove Ball Bearings（618 / 619 SERIES）. Key dimensional parameters include a 150 mm bore diameter, a 210 mm outer diameter, and a 28 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
61930 - Deep Groove Ball Bearings（618 / 619 SERIES）
Technical Specifications
| Overview | |
|---|---|
| Part Number | 61930 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Seal Type | Open / Contact Seal Options |
| Load Direction | Radial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 150 mm |
| Width (B) | 28 mm |
| Outer Diameter (D) | 210 mm |
| Bore Diameter Tolerance | -0.025-0 mm |
| Outside Diameter Tolerance | -0.03-0 mm |
| Width Tolerance | -0.25-0 mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 85 kN |
| Basic Static Radial Load Rating C0r (kN) | 90.5 kN |
| Limiting Speed – Grease (r/min) | 2800 r/min |
| Limiting Speed – Oil (r/min) | 3400 (r/min) |
| Material | |
| Mass (kg) | 2.59 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C |
| Precision Class | P0 |
| Radial Internal Clearance | 0.018-0.053 mm |
61930 210 mm 150 mm 28 mm Frequently Asked Questions about 61930 Deep Groove Ball Bearings（618 / 619 SERIES）
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To extend the trouble-free lifespan of CHG Bearing 61930, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
To match diverse operational dynamics, CHG Bearing supplies 61930 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
When fitting 61930 over a 150 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To ensure optimum performance of CHG Bearing 61930 Deep Groove Ball Bearings（618 / 619 SERIES） under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 150 mm bore. For the 210 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
