Manufactured by CHG Bearing, the 61916P4 is a precision Deep Groove Ball Bearings（618 / 619 SERIES）. Key dimensional parameters include a 80 mm bore diameter, a 110 mm outer diameter, and a 16 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
61916P4 - Deep Groove Ball Bearings（618 / 619 SERIES）
Technical Specifications
| Overview | |
|---|---|
| Part Number | 61916P4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Seal Type | Open / Contact Seal Options |
| Load Direction | Radial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 80 mm |
| Width (B) | 16 mm |
| Outer Diameter (D) | 110 mm |
| Bore Diameter Tolerance | -0.007-0 mm |
| Outside Diameter Tolerance | -0.008-0 mm |
| Width Tolerance | -0.15-0 mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 25 kN |
| Basic Static Radial Load Rating C0r (kN) | 24 kN |
| Limiting Speed – Grease (r/min) | 5600 r/min |
| Limiting Speed – Oil (r/min) | 6700 (r/min) |
| Material | |
| Mass (kg) | 0.391 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C |
| Precision Class | P4 |
| Radial Internal Clearance | 0.01-0.03 mm |
61916P4 110 mm 80 mm 16 mm Frequently Asked Questions about 61916P4 Deep Groove Ball Bearings（618 / 619 SERIES）
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The CHG Bearing 61916P4 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
In its sealed configuration (Open / Contact Seal Options), CHG Bearing pre-charges 61916P4 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Model 61916P4 is manufactured by CHG Bearing in standard Normal clearance (CN) for ambient temperature transmission, and C3 or C4 clearance for heavy duty applications. C3 clearance compensates for radial shrinkage caused by tight shaft press-fits (bore 80 mm) and steep thermal gradients between inner and outer rings.
Each 61916P4 produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit (80 mm bore side) ensures perfect planar contact without edge binding.
