Manufactured by CHG Bearing, the 61914P4 is a precision Deep Groove Ball Bearings（618 / 619 SERIES）. Key dimensional parameters include a 70 mm bore diameter, a 100 mm outer diameter, and a 16 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
61914P4 - Deep Groove Ball Bearings（618 / 619 SERIES）
Technical Specifications
| Overview | |
|---|---|
| Part Number | 61914P4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Seal Type | Open / Contact Seal Options |
| Load Direction | Radial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 70 mm |
| Width (B) | 16 mm |
| Outer Diameter (D) | 100 mm |
| Bore Diameter Tolerance | -0.007-0 mm |
| Outside Diameter Tolerance | -0.008-0 mm |
| Width Tolerance | -0.15-0 mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 23.7 kN |
| Basic Static Radial Load Rating C0r (kN) | 21.2 kN |
| Limiting Speed – Grease (r/min) | 6300 r/min |
| Limiting Speed – Oil (r/min) | 7500 (r/min) |
| Material | |
| Mass (kg) | 0.349 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C |
| Precision Class | P4 |
| Radial Internal Clearance | 0.01-0.03 mm |
61914P4 100 mm 70 mm 16 mm Frequently Asked Questions about 61914P4 Deep Groove Ball Bearings（618 / 619 SERIES）
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open / Contact Seal Options), CHG Bearing pre-charges 61914P4 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Quality starts with raw material selection: CHG Bearing crafts 61914P4 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
Model 61914P4 is manufactured by CHG Bearing in standard Normal clearance (CN) for ambient temperature transmission, and C3 or C4 clearance for heavy duty applications. C3 clearance compensates for radial shrinkage caused by tight shaft press-fits (bore 70 mm) and steep thermal gradients between inner and outer rings.
When fitting 61914P4 over a 70 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
