Manufactured by CHG Bearing, the 61908P4 is a precision Deep Groove Ball Bearings（618 / 619 SERIES）. Key dimensional parameters include a 40 mm bore diameter, a 62 mm outer diameter, and a 12 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
61908P4 - Deep Groove Ball Bearings（618 / 619 SERIES）
Technical Specifications
| Overview | |
|---|---|
| Part Number | 61908P4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Seal Type | Open / Contact Seal Options |
| Load Direction | Radial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 40 mm |
| Width (B) | 12 mm |
| Outer Diameter (D) | 62 mm |
| Bore Diameter Tolerance | -0.006-0 mm |
| Outside Diameter Tolerance | -0.007-0 mm |
| Width Tolerance | -0.12-0 mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 13.7 kN |
| Basic Static Radial Load Rating C0r (kN) | 10 kN |
| Limiting Speed – Grease (r/min) | 11000 r/min |
| Limiting Speed – Oil (r/min) | 13000 (r/min) |
| Material | |
| Mass (kg) | 0.112 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C |
| Precision Class | P4 |
| Radial Internal Clearance | 0.006-0.02 mm |
61908P4 62 mm 40 mm 12 mm Frequently Asked Questions about 61908P4 Deep Groove Ball Bearings（618 / 619 SERIES）
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To ensure optimum performance of CHG Bearing 61908P4 Deep Groove Ball Bearings（618 / 619 SERIES） under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 40 mm bore. For the 62 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
When fitting 61908P4 over a 40 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Standard batches of CHG Bearing 61908P4 conform strictly to ISO Class Normal (ABEC-1). For high-precision machine tool spindles, gearboxes, or robotics requiring tighter runouts, CHG Bearing can provide custom batches graded to ISO Class 6 (P6/ABEC-3) or ISO Class 5 (P5/ABEC-5) with 100% micrometer verification.
The CHG Bearing 61908P4 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
