Manufactured by CHG Bearing, the HSX011814 is a precision HSX Series Crossed Roller Bearings. Key dimensional parameters include a 70 mm bore diameter, a 90 mm outer diameter, and a 10 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HSX011814 - HSX Series Crossed Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HSX011814 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Crossed Roller Bearing |
| Series | HSX |
| Design Type | Integrated Inner and Outer Rings |
| Seal Type | Double-sided Sealed |
| Dimensions | |
| Roller Pitch Circle Diameter dp | 80 mm |
| Bore Diameter (d) | 70 mm |
| Width (B) | 10 mm |
| Outer Diameter (D) | 90 mm |
| Minimum Chamfer Dimension rmin | 0.6 mm |
| Inner Ring Shoulder Diameter ds | — mm |
| Outer Ring Shoulder Diameter Dh | — mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 12 kN |
| Basic Static Radial Load Rating C0r (kN) | 30 kN |
| Reference Data | |
| Reference Mass (kg) | 0.3 kg |
HSX011814 90 mm 70 mm 10 mm Frequently Asked Questions about HSX011814 HSX Series Crossed Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The CHG Bearing HSX011814 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
To match diverse operational dynamics, CHG Bearing supplies HSX011814 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
To extend the trouble-free lifespan of CHG Bearing HSX011814, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
To safeguard CHG Bearing HSX011814 against fretting wear and false brinelling during transport or vibration, assemble mating surfaces (70 mm x 90 mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
