Manufactured by CHG Bearing, the HRE2508 is a precision HRE Series Crossed Roller Bearings. Key dimensional parameters include a 25 mm bore diameter, a 41 mm outer diameter, and a 8 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HRE2508 - HRE Series Crossed Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HRE2508 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Crossed Roller Bearing |
| Series | HRE |
| Design Type | Split Inner Ring |
| Seal Type | Single-sided or Double-sided Sealed |
| Dimensions | |
| Roller Pitch Circle Diameter dp | 34 mm |
| Bore Diameter (d) | 25 mm |
| Width (B) | 8 mm |
| Outer Diameter (D) | 41 mm |
| Minimum Chamfer Dimension rmin | 0.5 mm |
| Inner Ring Shoulder Diameter ds | 29.5 mm |
| Outer Ring Shoulder Diameter Dh | 37.5 mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 3.63 kN |
| Basic Static Radial Load Rating C0r (kN) | 3.83 kN |
| Reference Data | |
| Reference Mass (kg) | 0.05 kg |
HRE2508 41 mm 25 mm 8 mm Frequently Asked Questions about HRE2508 HRE Series Crossed Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
For international ocean and air freight, CHG Bearing packs HRE2508 with industrial VCI anti-corrosion barrier wrapping, sealed polybags, individual cartons, and fumigated ocean-worthy wooden crates. This multi-layer barrier guarantees rust-free storage for a minimum shelf life of 24 to 36 months.
Every production batch of CHG Bearing HRE2508 HRE Series Crossed Roller Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
When fitting HRE2508 over a 25 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
As a primary manufacturer, CHG Bearing supports both trial batch evaluations and container-load supply for HRE2508. Standard catalog sizes are stocked for rapid 3–7 day dispatch, while high-volume OEM production runs typically dispatch within 30–45 days.
